Table of Contents
Advertisement
2
4
1. Clamp Screw
2. Washer (small diameter)
3. Washer (large diameter)
4. Bolt (12 mm × length 105 mm)
5. Nylon locking nut
234 (9.21")
117 (4.61")
117 (4.61")
25 (0.98")
25 (0.98")
ø13
204 (8.03")
102 (4.02")
102 (4.02")
ø13
1. Top of transom
ENOW00008-2
CAUTION
Install upper mounting bolts from the
boat side. Exposing threaded side of bolts
on the boat side can casue personal
injury.
Tighten the bolts securely, otherwise the
outboard motor could fall down.
1
ENOM00029-A
2. Battery installation
3
ENOW00012-1
5
ENOF00610-0
Battery electrolyte contains sulfuric acid
and is hazardous, causes a burn if come in
contact with your skin, and poisonous if
swallowed.
Keep batter y and electroly te away from
reach of children.
1
When handling the battery, be sure to:
39 (1.54")
64 (2.52")
89 (3.50")
In case you came in contact with battery
222 (8.74")
electrolyte:
26 (1.02")
248 (9.76")
ENOF00611-0
In case battery electrolyte is swallowed:
ENOW00013-A
Battery generates explosive hydrogen gas.
Be sure to:
ENON00948-0
Notes
Apply sealing agent, such as silicone
sealant between the bolts and the
transom board holes before tightening
the bolts.
Do not reuse nylon locking nut.
WARNING
Read all warnings shown on the battery
case.
Prevent electrolyte from coming in con-
tact with any part of your body. Contact
can cause serious burn or, if come in con-
tact with your eye, loss of sight. Use
safety glasses and rubber gloves.
For skin, flush thoroughly with water.
For eye, flush thoroughly with water, and
then seek immediate medical treatment.
Seek immediate medical treatment.
WARNING
Charge the battery in a well-ventilated
place.
23
INSTALLATION
5
Advertisement
Table of Contents
