Table of Contents
Advertisement
ENON00010-1
Note
Start-in-gear protection prevents the
engine from starting at other than neutral
shift. In-gear starting of engine will move
the boat immediately, potentially leading to
fall down or causing passenger(s) to be
thrown overboard.
ENOM01662-A
Tiller handle type
1. Be sure to install the stop switch lock
to the stop switch, and attach the
stop switch lanyard securely to the
operator or to the operator's PFD
(Personal Flotation Device.)
2
1. Stop switch lock
2. Stop switch
2. Set the shift lever in the Neutral posi-
tion.
1
1. Shift lever
2. Neutral
1
ENOF01906-0
2
ENOF01907-0
3. Set the throttle grip to START posi-
tion.
3
4
1
1. Throttle grip
2. START position
3. Full closed
4. Full opened
4. Pull the choke knob fully.
1
1. Choke knob
ENON00501-0
Note
Choke is not necessary when the engine is
warm. Set the throttle grip to "START"
position.
ENON00502-0
Note
If engine does not start with 4 or 5 times
starting operation, push the knob back and
restart.
ENGINE OPERATION
2
ENOF01908-1
ENOF01909-0
33
7
Advertisement
Table of Contents
