Table of Contents
Advertisement
3. Inject a sufficient amount of engine
oil through the spark plug holes.
Pull the recoil starter rope several
times to circulate the oil throughout
the outboard motor.
ENOM00106-1
6. Cold weather precautions
If you moor your boat in cold weather at
temperatures below 0°C (32°F), water
residue in water pump may freeze and
may damage the pump, impeller, etc. To
avoid, submerge the lower half of the
outboard motor into the water.
ENOM00107-A
7. Striking underwater object
ENOW00935-0
CAUTION
Striking the sea bottom or an underwater
object may severely damage the outboard
motor.
Follow the procedure below and consult
a dealer as soon as possible.
1. Stop the engine immediately.
2. Check the control system, gear case,
boat transom etc.
3. Return to the nearest habor slowly
and carefully.
4. Consult a dealer check the outboard
motor before operation again.
INSPECTION AND MAINTENANCE
ENOM00121-0
8. Operation with multiple
outboard motors
When operating the outboard motors in
reverse at more than the lowest speed,
be sure that all engines are running.
If any engine has stopped, be sure to tilt
the outboard motor up and keep its pro-
peller out of the water.
Otherwise, water could enter the engine
and cause damage to it.
67
ENOF01145-0
10
Advertisement
Table of Contents
