Table of Contents
Advertisement
ENOM00970-A
Fuel system draining
ENOW00028-A
WARNING
For details on handling fuel, contact an
authorized dealer.
Fuel and fuel vapors are extremely flamma-
ble and can be explosive.
If fuel is spilled, wipe it up immediately.
Keep the fuel tank well away from sources
of ignition, e.g. sparks or open flames
Perform all work outdoors or in a well
ventilated place.
ENOW00097-0
WARNING
Be sure to use cloth to remove fuel remain-
ing in the cowl and dispose of it in accor-
d an c e w i t h l o c a l f ir e pr e ve n t i o n an d
environment protection regulations.
1. Disconnect the fuel hose from the
outboard motor.
2. Remove the top cowl.
3. Place an approved fuel container
under the drain screw and use a fun-
nel to avoid spilling fuel.
4. Loosen the carburetor drain screw.
5. Tilt up the outboard motor until fuel
flows out of the drain tube.
6. Leave the outboard motor in this
position until all fu e l has be en
drained.
7. When thoroughly drained, retighten
the drain screw securely.
INSPECTION AND MAINTENANCE
8. Check the drained fuel for the pres-
ence of water or other contaminants.
If fuel is contaminated, reassemble
the outboard motor, refill the carbu-
retor with fuel, and then drain the
fuel again. Repeat this procedure
until no water or other contaminants
are present in the drained fuel.
1. Carburetor drain screw
ENOM00102-0
Battery
ENOW00931-A
WARNING
Place the battery away from any source of
fire, sparks and open flames such as
burners or welding equipment.
Place the battery away from fuel tank.
Accidental sparks of battery may cause
explosion of gasoline.
1. Disconnect the battery cables and be
sure to remove the negative terminal
first.
2. Wipe off any chemical deposits, dirt,
or grease.
3. Apply grease to the battery terminals.
65
1
ENOF02370-0
10
Advertisement
Table of Contents
