TOHATSU EverRun MX 40D3 Owner's Manual page 56

56
INSPECTION AND MAINTENANCE
Continuous operation at maximum engine speed
Continuous operation at idling or trolling speed
Operation without appropriate warm up
Stopping without sufficient time for the engine to cool down
Frequent sudden acceleration and sudden deceleration
Frequent stop start operation
Frequent shifting operation
Frequent operation in acidic, polluted, muddy, sandy, or shallow water
Appropriate maintenance can prolong your engine life.
Consult your Tohatsu authorized dealer for suitable maintenance interval depending on
operating and environmental conditions.
ENOM00093-A
Fuel filters and fuel tank cleaning
ENOW00093-1
Gasoline and its vapor is very flammable and
can be explosive.
Do not start this procedure while engine
is operating or while engine is hot.
Place fuel filter away from every source of
ignition such as sparks or open flames.
If gasoline is spilled, wipe up immediately
and dispose according to the local regula-
tions.
Install fuel filter with all related parts in
place, or fuel leak could occur, leading to
10
catching fire or explosion.
Check fuel system regularly for leakage.
Contact authorized dealer for fuel system
services. Services by unqualified person
could lead to engine damage.
Water or dirt in the fuel tank will cause
engine performance problems.
Check and clean the tank at specified
intervals or after the outboard motor has
been stored over three months.
Fuel filters are provided inside the fuel
tank and engine.
WARNING
ENOM00094-0
Fuel filter (for engine)
1. Check the cup for water and debris.
1
2
3
4
5
1. Body
2. O-ring
3. Filter
4. O-ring
5. Cup
6. Arrow to indicate fuel flow direction
ENOF01925-0
6
ENOF00096-B