Table of Contents
Advertisement
Fig. 83 — Installing the Bracket, Space, and Damper
(Sizes 61, 85, 96, and 110)
13. Attach bird screen to the inside of the hood using the 1/4 in.-
14 x 5/8 in. long sheet metal screws (without neoprene
washer.) Also, attach brackets to top panel, then attach top
panel to power exhaust assembly. See Fig. 84.
Fig. 84 — Attaching Bird Screen and Top Panel
14. Attach front panel to power exhaust assembly using the
/
in.-14 x
/
in. long sheet metal screws (without neoprene
1
5
4
8
washer.) Also, attach the lifting brackets to each side of the
top of the assembly using the 1/4 in.-14 x 5/8 in. long sheet
metal screws (without neoprene washer.) See Fig. 85.
Fig. 85 — Attaching the Front Panel and
Lifting Brackets
Humidifier Installation
ASSEMBLE CONTROL VALVE ASSEMBLY
Valve kits are sold as separate items through your local Carel rep-
resentative (shipped unassembled). Figures 86 and 87 show the
components in those kits.
Alternatively, control valves from any manufacturer may be used
with the Carel humidifier. Valve size is selected by looking up the
steam load and pressure values from the AHUBuilder
in a steam valve manufacturer's flow rate and pressure chart. Fig-
ures 86 and 87 can then be used as a guide to purchase the remain-
der of the components locally.
128
program
®
Advertisement
Table of Contents
