Carrier Aero 39MN MW03-110 Series Installation, Start-Up And Service Instructions Manual page 133

BAFFLE, LEFT
CHANNEL, HAT
PAN, CONDENSATE
CENTERED WITHIN SECTION
a39-2988ef
Fig. 93 — Single Slope Condensate Drain — Apply Gasket
BAFFLE, TOP
BAFFLE, CENTER
Fig. 94 — Double Slope Condensate Drain — Apply Gasket
CHANNEL, HAT
COIL FRAMES
BAFFLE, RIGHT
ANGLE
ATTACHED TO COILS
BOTH SIDES
IMPORTANT: ADHESIVE GASKET MUST BE
APPLIED TO THE FULL LENGTH OF THE BOTTOM
BAFFLE MATING FLANGE TO CREATE SEAL BETWEEN
THE COIL SIDE CASING AND THE BAFFLE.
SEE ILLUSTRATION BELOW.
BAFFLE, BOTTOM
APPLY FLUSH TO THIS EDGE
GASKET, ADHESIVE
133
BOTTOM BAFFLE