Table of Contents
Advertisement
Maintenance
4.
With the FE-165 still tilted on the same side, fit one of the
remaining three leg assemblies into the empty leg housing
position. Secure the leg in position using the procedure shown in
steps 2 and 3.
!
M6
M8
32
Steps 2 and 3
5.
Carefully tilt the FE-165 over onto the two fitted leg assemblies. Fit
the remaining two leg assemblies into the leg housings and secure
them in position using the procedure shown in steps 2 and 3.
!
M6
M8
6.
Carefully tilt the FE-165 back upright
to rest on all four castor wheels.
Steps 2 and 3
M6
M8
Advertisement
Table of Contents
