Maintenance
Routine Maintenance
The FE-165 requires minimal routine maintenance, apart from checking
the connections and overall operation periodically.
Routine checks
During use, check the following:
•
Check that the payload is balanced and fully secured.
•
Check cables for signs of wear or damage. Replace as necessary.
•
Check that all cables are connected properly.
Cleaning
WARNING! Disconnect and isolate the product from the
power supply before cleaning.
CAUTION! Do NOT use oil or grease on any exposed part
of the elevation column. This is unnecessary and traps dirt
which acts as an abrasive.
During normal use the only cleaning required should be a regular wipe
over with a dry, lint-free cloth. Dirt accumulated during storage or
periods of disuse may be removed with a vacuum cleaner. Particular
attention should be paid to all connection ports on the FE-165.
30
Changing the Fuse
WARNING! Risk of electric shock. Disconnect the power
cable. Fuses must only be changed by a trained and
competent person.
CAUTION! The replacement fuse must be the correct type
and rating: Type T5AH, 250V.
1.
Switch OFF and disconnect the AC power source.
2.
Using a flat-blade screwdriver or coin, rotate the fuse holder (a)
anticlockwise and remove (b).
3.
Replace the fuse
and reinstall the
fuse holder.