Seagull Models EDGE 540 V3 Assembly Manual page 16

Edge 540 V3, 77.5" wingspan 35-40cc
11.
Feed one rudder cable through the pre
installed cable exit tube in the rear of the
fuse toward the front of the fuse. Repeat
for other side.
12.
hread cable through brass swage tube.
13.
hread cable through the threaded
coupler hole, and back through the brass
swage tube as shown.
Loop the cable back through the brass
swage tube and pull tight.
16
Instruction Manual.
14.
15.
Crimp the brass swage tube with a
crimping tool or pliers.
16.
Cut of excess cable as shown.
17.