Edge 540 V3, 77.5" wingspan 35-40cc
2.
3.
4.
5.
14
140mm
Instruction Manual.
NSTALL RUDDER CABLE AND SERVO
NOTE : servos arm is not provided
from manufacturer.
1.
2.
Tape the rudder balance tab to the top
leading edge of the vertical in in the
neutral position as shown. his ensures
the rudder is straight when the cables are
attached.
3.
hread the rudder cable through a
brass swage tube, then the threaded co
pler, and back through the brass swage
tube on both sides. Pull light tension on
the cable through the coupler on both
sides as shown.
38mm