Safety Systems Test - Challenge CHAMP 150 Operator's Manual

9.0 Safety Systems Test

9.0 Safety Systems Test
Machine manufacturer CHALLENGE Model CHAMP 150
Serial Number __________________
Frequency of test: THESE TESTS SHOULD BE PERFORMED AT THE BEGINNING OF EACH
WORK DAY.
Switch power on and make sure the knife and clamp are in the up position (if they are not, follow the
instructions in this manual to send them up).
Test #1: With the front guard open, press the cut buttons. Nothing should happen. If the knife
and/or clamp come down with the front guard open, do not use the machine. Repair or adjustment is
needed.
Test #2: Close the front guard and press the cut buttons. While the clamp or knife is coming down,
open the front guard. The knife and clamp should immediately return to the up position. If they do
not, do not use the machine. Repair or adjustment is needed.
F.150CH-O-A Page 26 June 2023