Table of Contents
Advertisement
10.0 Safety Systems Test
10.0 Safety Systems Test
Machine manufacturer
Serial Number __________________
Frequency of test: THESE TESTS SHOULD BE PERFORMED AT THE BEGINNING OF EACH
WORK DAY.
Turn the power on and make sure the knife and clamp are in the up position (if they are not, follow the
instructions in this manual to send them up).
Test #1: With the front shield open, press the cut buttons. Nothing should happen. If the knife
comes down with the front guard open, do not use the machine. Repair or adjustment is needed.
Test #2: Close the front guard and press the cut buttons. While the knife is coming down, open the
front shield. The knife should immediately return to the up position. If it does not, do not use the
machine. Repair or adjustment is needed.
30
CHALLENGE
Model
SPARTAN 185 AEP
Advertisement
Table of Contents
