Standard Sg Ready - Ariston COMPACT M NET R32 Technical Instructions For Installation

Hide thumbs

Table Of Contents

Table of Contents

Under-floor system

°C

Delivery temperature to the system

Outside air temperature

When the outdoor temperature rises (summer), three condi-

tions may arise:

– The room temperature increases, indicating that a gen-

tler curve must be set.

– The room temperature decreases, indicating that a

steeper curve must be set.

– The temperature of the room remains constant, indicat-

ing that the set curve is exactly right.

Once you have found the curve which maintains the room

temperature at a constant level, check the actual temperature

value.

IMPORTANT:

If the room temperature is higher than the desired value,

the curve must be shifted lower. If the room temperature

is too low, the curve should be shifted upwards. If the

temperature of the room corresponds with the desired

value, the curve is correct.

In the above graph, the curves have been divided into

two groups:

– Fan-coil systems

– Under-floor systems

60 / EN

44 °C

Fig. 103

4.5.4 Parallel shifting

Turn the selector

then set the most suitable value and

press the selector

to confirm.

4.5.6 Maximum delivery temperature

Turn the selector

then set the most suitable value and

press the selector

to confirm.

4.5.7 Minimum delivery temperature

Repeat the steps described previously to set the values for

zone 2 (where present), by selecting menu 5.

6.8