Table of Contents
Advertisement
3.3.5
Arranging the connections
– To allow the passage of cables, use a screwdriver to re-
move the pre-cut pieces (1) from the unit's frame.
– To detach the pre-cut pieces effectively, keep the unit's
front panel fitted on.
– Before passing the cables, position the cable grommets
(2) contained in the documentation envelope.
– Loosen the screws (3) and remove the front panel (4)
by pulling it downwards and forward.
22 / EN
1
2
Fig. 32
4
3
B
3
A
Fig. 33
3.3.6
Installing the accessory kit
Anti-freeze kit
G ½"
Condensate collection tray
– Loosen screw (1) and remove the panel (2).
– Loosen screws (3) and (4).
Installation
Fig. 34
1
2
Fig. 35
5
4
3
Fig. 36
Advertisement
Table of Contents
