Technical Data - Gossen MetraWatt PROFITEST H+E EASY CHECK Operating Instructions Manual

Gossen Metrawatt GmbH
6.6

Technical Data

Power Supply
Ambient
Conditions
Electrical
Safety
Mechanical
Design
Interfaces
6.6.1 Test/Analysis Standards
AC
Measurement of voltage values in all three phases and N
Internal rechargeable battery (charging via USB port)
Type
Nominal voltage
mAh
Energy
Protective function
Charging current
Discharge current
Internal resistance
Weight
Dimensions (dia. x L)
Operating temperature
Storage temperature
Relative atmospheric
humidity
Elevation
Measuring category
Pollution degree
Protection category
Protection
Housing (W × H × D)
Weight:
Display
Micro USB port (for charging the battery)
DIN EN IEC 61851-1
VDE 0122-1
Electric vehicle conductive charging system –
Part 1: General requirements
PROFITEST H+E EASY CHECK
18650H-2600
3.7 V
2600 mAh
9,62 Wh
PCB/IC protection
Max. 1 C
Max. 5.2 A (2 C)
180 mΩ
48 g
18 x 69 mm
-5 ... +45 °C
-5 ... +60 °C
Max. 75%, non-condensing,
no condensation allowed
Max. 2000 m
CAT III, 300 V
2
II
IP 21
110 × 70 × 210 mm
998 g
Monochrome
10