Errors; Maintenance; Technical Data - Gossen MetraWatt PROFITEST H+E TECH Operating Instructions Manual

Operating Instructions

Errors

Error
After being switched on, the
device switches itself back off
again.
The device does not respond
when the on button is pushed.
The device indicates incorrect
values for PWM voltage.

Maintenance

Due to the device's characteristics, no maintenance should be carried out by the user. If repairs
should become necessary, please contact our repair and replacement parts service department
(see address on back cover).
Outside surfaces may only be cleaned with a dry, lint-free cloth.
Danger!
No liquids may be permitted to penetrate into the device's interior or the plug connectors.

Technical Data

Input voltage
Frequency
Test consumer power
Electrical Safety
Protection class
Nominal voltage
Test voltage
Measuring category
Pollution degree
Ambient Conditions
Operating temperature
Storage temperature
Relative humidity
Mechanical Design
Dimensions (W x L x H)
Weight
Protection
Find Quality Products Online at:
Cause
On button not pressed long
enough.
No batteries are installed or
the batteries are depleted.
Battery depleted
400 V (3-phase)
50 Hz
Max. 2.9 kVA
I
400 V DC
500 V DC
CAT III, 300 V
2
-10 to 45 °C
-25 to 60 °C
Up to 80% (no condensation)
200 x 240 x 115 mm
3.65 kg
IP 21
GlobalTestSupply
www.
PROFITEST H+E TECH
Required Action
Press and hold the on button
until the device remains on.
Install new batteries or use the
power pack.
Observe the battery display
and install new batteries if
necessary.
.com
sales@GlobalTestSupply.com
Page 13