JVC HR-S3500U Instructions Manual page 8
Video cassette recorder
Hide thumbs
Also See for HR-S3500U:
- Manual d'instructions (64 pages) ,
- Quick start (2 pages) ,
- Instructions manual (68 pages)
Advertisement
lay
Auto Clock Set/Auto
Tuner Set
ATTENTION
If you
use a cab]e
box, Plug & Play will
not function;
set
the clock
and tuner
channe]s
manua][y.
(_'
pg.ll
1 5)
iMPORTANT
• Don't
press any buttons
on the VCR or remote
while
Plug & Play is in progress.
• if you perform
Plug & Play successfully,
there's no need to
perform
the Clock
(_c_'pg. 11 ) and Tuner (_'
pg. 14)
procedures.
If, however,
you want t_ add or delete
channels,
refer to "Add Or Delete
AChanne["
on page 15.
TimePlug & Play function sets timeclock and tuner channels
automatically
when power is first connected to the VCR. Time
antenna cable must be connected for the Plug & Play function.
Timetime and date calmbe set automatically
from clock setting
data that is transmitted by one of the regular TV broadcast
channels. We call this TV channel the "Host Channel" and it is
a PBS channel in your area.
PLUG & PLAYSETUP
Connect
the antenna
cable to the VCR (_'
pg. 6). Then
connect
the VCR's power
plug to an AC outlet.
Do net
power
on the VCR. The clock and tuner
channels
will
be set automatically.
NOTES:
• Auto
clock
set is performed
first. The auto
clock
set
function
scans all the channels
received
by your
VCR
to find
the Host Channel
and then sets the clock.
"Auto"
blinks
on the front display
panel
during
Auto
clock
set.
• Auto
channel
set is performed
next. The auto channel
set function
scans all the channels
that are receivable
by your
VCR. It then automatically
assigns
each
receivable
channels
to the CHAr
(÷/-]
buttons.
It
skips non-receivable
channels.
During
auto
channel
set the channel
numbers
are displayed
as they are
scanned
and set.
e When
Plug & Play has been completed
successfully
the
correct
time is displayed.
e If an incorrect
time
or '"
:
"appears
on the display
panel,
see "What
To Do If Plug & Play Has Failed"
on
next page.
During
initial
Auto
Clock
Set
"Auto"
blinks.
During Auto Channel Set
Timechannel numbers are displayed
as they are scanned and set.
Plug & Play Completed
Time current
time
(including
AM/PM)
is displayed.
* If aim incorrect
time
or "
:
" appears
on the display
panel,
see "What
To Do If Plug & Play Has Failed"
on next page.
Advertisement
