JVC HR-S3500U Instructions Manual page 57

1. When scanning channels, some of
them are skipped over.
2. The channel can't be changed.
3. Time remote control won't operate
my TV or cable box or DBS receiver.
4. Even though Auto or Semi-Auto
clock setting has been selected, the
clock is incorrect.
e Those channels have been preset to [] If you need the skipped channels,
be skipped, i restore them (;,z:_ pg. 15).
e Recording is in progress. Press PAUSE to pause the recording,
change channels, then press PLAY to
resume recording.
e Time remote control brand setting is Re-set the remote control to the
incorrect, correct brand (_ pg. 51 or 52 or 53).
e Time clock setting data received from I Select a different Host Channel during
the Host Channel is incorrect. _ the Semi-Auto setting procedure
[] (_z:_ pg. 12), or perform time Manual
setting procedure (_ pg. 13).
ATTENTION
This VCR contains microcomputers. External electronic noise or interference can cause microcomputer to malfunction. If the VCR
does not operate correctly switch its power off and unplug the power cord from timeAC supply. Wait for a while and then plug the
power back in. Eject and check the condition of the cassette. If everyihing appears normal resume operating the VCR as usual.