JVC HR-S3500U Instructions Manual page 50

RETURNTO NORMAL SCREEN
Press MENU.
ACCESS MAIN MENU SCREEN
Press MENU.
ACCESS FUNCTION SET SCREEN
PressCH AT or SHUTTLE PLUS Av to move time
highlight bar (arrow) to "FUNCTK)N SET", then press OK
or SHUTTLE PLUS D.
ENABLE REMOTE PAUSE
FUNCTION
Press CH AV or SHUTTLE FUNCTIO_
PLUS AV to move the
highlight bar (arrow) to
"AV COMPU-LINK", then
press OK or SHUTTLE
PLUS b to set to "OFF".
• The REMOTE PAUSE/AV
COMPU-LINK connec-
tor works as the AV
Compu[ink Playback
connectoF when "AV
COMPU-LINK" is set to
"ON" (_' pg. 31), and
works as the Remote
Patlse connector when
"AV COMPU-LINK" is
set to "OFF".
SUPERIMPOSE ON
AUTO SP_EP TIMER OFF
VIDEO STABiLiZER OFF
2ND AUDIO RECORD OFF
AUDIO MONITOR HI-FI
NEXT PAGE
41-
PREVIOUS PAGE
S-VHS MODE AUTO
, "0 ' !
VIDEO CALIBRATION ON
REAR AUX INPUT VIDEO
TAPE DUB MODE ON
RETURNTO NORMAL SCREEN
Press MENU.
ACCESS MAIN MENU SCREEN
Press MENU.
ACCESS FUNCTION SETSCREEN
PressCH AT or SHUTTLE PLUS Av to move the
highlight bar (arrow) to "FUNCTK)N SET", then press OK
or SHUTTLE PLUS D.
SELECT TAPEDUB MODE
Move time highlight bar
FUNCTION
(arrow) to "]-APE DUB . _ •
MODE" by pressing CH SUPERIMPOSE
ON
AT orSHUTTLE PLUS Av,
AUTOSP_EPTIMER OFF
VIDEO S TABILIZER OFF
then press OK orSHUTTLE 2NDAUDIO RECORD OFF
PLUS b to set to "ON". AUDIO MONITOR HI-FI
NEXT PAGE
,!.
PREVIOUS P AGE
S-VHS MODE AUTO
AVCOMPU-LINK ON
VIDEO CALIBRATION ON
REARAUXINPUT VIDEO
'' | _ OI 0
RETURNTO NORMAL SCREEN
PressMENU.
STARTPLAYER
Set the camcorder toits play mode.
NOTE:
If the camcorder is equipped with a superimpose/OSD
disable feature then set its superimpose or display
feature to OFF before pressing play.
STARTRECORDER
Set your VCR to its record mode.
e if you are using a Master Edit Control-equipped JVC
camcorder, it can put the recorder automatically into
Record mode. (Refer to camcorder's instruction
manual.)
NOTES:
• Be sure to set "TAPE DUB MODE" back to "OFF" when you
finish editing.
• When "TAPE DUB MODE" is set to "ON"Active Video
Calibration is deactivated in order to provide better picture
quality edits.
• If you use an auxiliary input to connect a cable box or DBS
receiver make sure that the correct input ("L-1% "F-1" or
"5-VIDEO'9 is selected after you have finished editing (_cv" step
3, 6, pg. 49).