JVC HR-S3500U Instructions Manual page 42

Express Timer
®
rograrnrnln
11un on time TV and select time VCR channel 3 or 4 (or AV
mode).
iSTART+/-
You can directly program the VCR's timer to record up to 8
shows, as far as a year in advance. Remember, the dock must be
set before you can program the timer (_' pg. 8 or 11).
LOAD A CASSETTE
Make sure time record safety tab is intact. If not, cover
the ho]e with adhesive tape, then load it into the VCR.
• Time VCR comes on, and the counter is reset,
automatically.
ACCESS VCR PLUS+
SCREEN
Press PROG.
ACCESS PROGRAM
SCREEN
Press START +/-. (If you're
just starting out,
"PROGRAM 1" appears.)
PROGRAM 1
START STOP
DATE ¢R
SET PROGRAM STARTTIME
Press START +/- to enter PROGRAM 1
the time you want
recording to start.
• Press and hold START
+/- to move in 30-
minute increments, or
press and release
repeatedly to move [
minute at a time.
START STOP
DATE
CH
SET PROGRAM STOP TIME
Press STOP +/- to enter the time you want recording to
stop.
• Press and hold STOP +/-to move in 30-minute
increments, or press and release repeatedly to move 1
minute at a time.
SET PROGRAM DATE
Press DATE +/-. (Time current date is displayed on
screen. Time date you enter appears in its place.)
SET CHANNEL NUMBER
Press CH +/-.
e If you are using a DBS receiver, see "ATTENTION
FOR DBS RECEIVER USERS" on next page.
e Holding down CH +/- rapidly scans through the
channels.