JVC HR-S3500U Instructions Manual page 12

MENU
PLUSI
Semi-Auto
You can change the Host Channel/D.S.T./Time Zone setting
manually.
SETAUTO CLOCK TO ON
At the Clock Set screen,
press OK or SHUTTLE
PLUS E>repeatedly to
move the highlight bar to
"AUTO CLOCK" and press
CH AT or SHUTTLE PLUS
Av to set to "ON"•
To select the Host
Channel go to step 6
CLOCK SET
TiME
DATE YEAR
//98 THU
HOST CH -gAUT_ (CATV)
D.S.T. :AUTO
TIMEZONE :AUTO
b To select the D.S.I_ mode go to step 7
c To select the Time Zone go to step 8
NOTE:
The time that has been set previously will be erased
when "AUTO CLOCK", "HOST CH", "D.S.T." or "TIME
ZONE" setting is changed.
SELECT HOST CHANNEL
You can either select "AUTO" or enter a PBS channel
number. Move time highlight bar to "HOST CH" by
pressing OK or SHUTTLE PLUS E>, then press CH AT
or SHUTTLE PLUS z_v to set to "AUTO" or the desired
PBS channel number.
NOTE:
There are some PBS channels that do not transmit clock
setting data.
SELECT D.S.T.MODE
You have three choices:
Select "AUTO" and the adjustment to your VCR's
clock will be made according to the incoming signal
from the host channel.
b Select "ON" and the adjustment will be made based
on the clock itself•
c- Select "OFF" if Daylight Saving Time does not apply
to you.
Move the highlight bar to "D.S.T." by pressing OK or
SHUTTLE
PLUS
E>, then press CH A_r or SHUTTLE
PLUS Av to select the desired mode.
**AUTO DAYLIGHT SAVING TIME
This function enables automatic adjustment of the VCR's
clock at the start and end of Daylight Saving lime.
With Auto DST activated ....
•.. on time first Sunday of April at 2:00 AM, the clock is
adjusted to 3:00 AM.
•.. on time last Sunday of October at 2:00 AM, the clock is
adjusted to 1:00 AM.