JVC HR-S3500U Instructions Manual page 20

11un on time TV and select time VCR channel 3 or 4 (or AV
mode).
POWER
MENU
PLUS]
Set DBS Receiver Output
Channel & DItS Receiver
Brand
TURN ON DBS RECEIVER
Select a channel other than channel 55, 100 or 205 on
your DBS receiver.
TURN ON THE VCR
Press POWER.
• Set the VCR to time channel (3 or 4 or F-1 or L-l) on
which the signals from the DBS receiver are received.
ACCESS MAIN MENU
SCREEN
Press MENU•
ACCESS INITIAL SET
SCREEN
Press CH,_v or SHUTTLE PLUS Ax7 to move the
highlight bar (arrow) to "INITIAL SET", then press OK or
SHUTTLE PLUS F>.
ACCESS DBS RECEIVERSET
SCREEN
Press CH_,v or SHUTTLE
PLUS AV to move time
highlight bar (arrow) to
"DBS RECEIVER SET", then
press OK or SHUTTLE
PLUS [>.
INITIAL BET
CLOCK BET
LANGUAGE ENGLISH
GUIDECHANNEL S ET
CABLE BOXSET
SELECTDBS RECEIVER
OUTPUTCHANNEL
Your selection depends on
how your DBS receiver is
connected to your VCR.
DBSRECEIVER SET
If your DB$ receiver is
connected to your VCR
using an RF connection...
•.. press CH ,_v or
SHUTTLE PLUS AV until ........................................................................
time channel number
representing the DBS receiver's output (CH3 CH4)
appears on the screen.
If your DBS receiver is connected to your VCR's
FRONT A UDIO/VIDEO IN connectors...
•.. press CH _.v or SHUTTLE PLUS AX7 until "ON F-1
(FRQNT)" appears on the screen.
If your DBS receiver is connected to your VCR's REAR
A UDIO/VIDEO IN connectors...
•.. press CHAv" or SHUTTLE PLUS AV until "ON L-1
(REAR)" appears on the screen.