JVC HR-S3500U Instructions Manual page 40

V¢ [us+
Setu
11u+n on timeTV and select timeVCR channel 3 or 4 (or AV
mode).
POWER
MENU
PLUS]
iMPORTANT
If you have moved to a different area or if a broadcasting
station's channel number has been changed, the wrong VCR
or CABLE CH number will be displayed on the VCR Plus+
Program screen (rc_' step 5 on page 39). When this happens,
perform the fol]owing steps to set the correct the Guide
Channel number for that station.
To ensure that VCR Plus+Timer Recording operates correctly it
is necessary to set time VCR P]us+ "Guide Channel Set " for each
station. Please read the following information carefully.
VCR Plus+ Guide Channel Matching
VCR P]us+ assigns a VCR P]us+ "Guide Channel" to broadcast
and cable TV channels. These Guide Channel numbers are also
ca]]ed the VCR P]us+ Channe] Codes. Most TV listings have a
section, usually a chart, indicating time "Guide Channel" numbers
assigned to each station. For accurate VCR Plus+ Programming
the VCR P]us+ Guide Channel number for each station should
match the channel number on which it is received in your area.
NOTFS:
• In many instances the VCR Plus+ Guide Channel numbers for
cable and broadcast TV stations DO NOT match the cham_el
number on which it is received by your VCR or cable box.
Check your TV listing, or contact your cable supplier for
details.
• Many broadcast TVstations can be viewed on cable. Check
your TV listing, or contact your cable supplier for details.
TURN ON THEVCR
Press POWER.
ACCESS MAIN MENU
SCREEN
Press MENU.
ACCESS INITIAL SET
SCREEN
Press CH_.V or SHUTTLE
PLUS A_7 to move the
highlight bar (arrow) to
"INITIAL SET", then press
OK or SHUTTLE PLUS E>.
MAIN MENU
FUNCTION SET
TUNEB SET