JVC HR-S3500U Instructions Manual page 30

SKIP SEARCH
MENU
ATTENTION
Movie Advance and Movie Advance (Preview) works only
on prerecorded cassettes that have been recorded in the SP
mode, and have no safety tab. If the VCR detects the EP
mode after you press OK in step 4, the following screen
appears.
MOVIE ADVANCE
MOVIE ADVANCE CANNOT
BESELECTED FOREP
RECORDINGS.
Skip Search will work for prerecorded
EPtapes.
When "MOVIE ADVANCE" is selected,..
• If you want to stop searching for time start of the movie,
simply press SKIP SEARCH or STOP.
When "MOVIE ADVANCE (PREVIEW)" is selected...
• If SK[P SEARCH was inadvertently pressed, press it again
to resume normal playback.
• While the VCR is searching for the next preview, if you
see a preview you wish to view, press SK[P SEARCH and
the VCR will immediate]y go to the start of that preview.
• If the VCR starts to reverse to a preview you do not wish
to view, press SK[P SEARCH to initiate searching to the
next preview.
NOTES:
• Normally there is a period of black and no audio at the
beginning and end of previews. The Movie Adw_nce feature
detects those parts where the picture fades to black and the
audio fades to silence, and initiates fast-motion to skip over
the detected previews.
• Some previews may not be detected and Movie Advance may
not work properly.
• The setting you selected in step 3 remains in effect until the
cassette is ejected.
Patents Pending [
Movie Advance
This feature helps you locate certain palts of prerecorded movies
(rented or purchased) and works in two ways.
• You can go to the beginning of the movie, skipping over all
previews.
• You can fast-motion the tape to the beginning of the next
preview, so you can skip over previews one by one.
LOAD A CASSETTE
Insert a cassette that has a prerecorded movie (rented or
purchased), with no safety tab, into the VCR. Playback
begins automatically.
ACCESS SKIP MENU
SCREEN
Press SKIP SEARCH.
SELECT MODE
Press CH,_v or SHUTTLE SKIPMENU
PLUS AV to r_ove the
highlight bar (arrow) to
your choice. MOVIE ADVANCE ( PREVIEW)
SKIPSEARCH
a Select "MOVIE
ADVANCE" if you want
to advance directly to ............
the beginning of the
movie.
b Select "MOVIE ADVANCE (PREVIEW)" if you want
to advance to the next preview,
c Select "SKIP SEARCH" if you do not want to perform
Movie Advance, then press OK to go back to the
normal screen. Pressing SKIP SEARCH activates the
Skip Search ftlnctiorl (c_' pg. 25 ).
PERFORMMOVIE
ADVANCE
If you selected "MOVIE ADVANCE" in step 3 and
press OK, time following screen will appeal with a
b]ue background. Time VCR will rewind the
beginning of time tape, then will fast-motion to the
beginning of the movie. "READY" wi]] appeal and
blink when time beginning of time movie is detected
and time Stop mode will be engaged. Press PLAY to
view the movie.
MOVIEADVANCE
SEARCHINGFOR BEGINNING
OF MOVIE.
MOVIE ADVANCE
% //
READY
b If you selected "MOVIE ADVANCE (PREVIEW)" in
step 3 and press OK, the VCR wi]] fast-motion to the
beginning of time next preview and normal playback
wi]] resume when it is detected.
Each press of SKIP SEARCH fast-motions to time
beginning of the next preview, thereby skipping over
one preview each time.
The tape wi]] forward-search a ]itt[e past the start of
the next preview, then wi]] reverse-serach to the
beginning of the preview and start playback.