Connecting The Power Cord - TransAct Ithaca 90PLUS Series Operator's Manual

26
Series 90PLUS Operator's Guide

CONNECTING THE POWER CORD

Caution: The printer must be grounded through the three-prong
power connector. Do not use a ground-defeating adapter.
Back of
Printer
1. Turn off the power switch.
Back of
Printer
2. Connect the power cord to the power socket located on the back of the
printer and the external AC power source.
The power cord is in the supplies envelope.
3. Turn on the printer. The READY light turns green indicating the printer is
functioning.
Note: The printer takes about 1.5 seconds to begin operation.
On Off
Power
Cord
Power
Switch