Installing A Ribbon Cassette - TransAct Ithaca 90PLUS Series Operator's Manual

24
Series 90PLUS Operator's Guide

INSTALLING A RIBBON CASSETTE

Note: If you are installing the printer, a ribbon cassette is located
in the supplies envelope.
Follow these steps to install or change the ribbon cassette.
Back of
Printer
1. Turn off the printer (if already on), and open the cassette cover.
Note: If you are removing a used ribbon cassette, grasp both sides
of the cassette. Lift and rock the cassette towards you. Do
not pull the cassette straight up.
Print head
Groove
2. Holding the ribbon cassette with the Mylar guide facing away from you,
insert the front of the cassette into the carriage. See the following
illustration.
On Off
Cassette
Tabs
Carriage
Power
Switch