Buttons; Ac Power Switch - TransAct Ithaca 90PLUS Series Operator's Manual

54
Series 90PLUS Operator's Guide

BUTTONS

AC POWER SWITCH

The printer includes three buttons and a power switch which have the
following functions:
FEED Button
The FEED button advances receipt/journal paper.
Note: To reverse the feed, press and hold the RESUME and FEED
buttons simultaneously. Reverse feed is useful to get the end
of a used paper roll out of the printer safely.
RELEASE Button
The RELEASE button is used on printers with slip/validation capability. This
button opens and closes the carrier assembly, allowing forms to be removed if
a jam occurs.
RESUME Button
The RESUME button restarts the printer after a form load failure.
Note: When the printer is reinitialized, all printer functions return
to their default settings (as if the printer were just turned on)
and any data stored in the print buffer is lost. In this case,
you may need to reenter the current transaction.
The AC power switch turns the printer on and puts it on-line (READY light
On, FORM light Off).
Note: The printer takes about 1.5 seconds to begin operation.