Choosing A Location For The Printer; Dimensions; Weight; Environmental Conditions - TransAct Ithaca 90PLUS Series Operator's Manual

CHOOSING A LOCATION FOR THE PRINTER

DIMENSIONS

WEIGHT

ENVIRONMENTAL CONDITIONS

AIRFLOW

The Series 90PLUS Printer is designed to be placed on point-of-sale terminals,
counter tops, or any other flat, stable surface that can support the weight of the
printer (about 10 pounds or 4.5 kilograms). Please refer to the dimensions
when selecting the best possible location. Be aware of the environmental
conditions of the location where you place the printer. Generally, the
environment in any store is suitable for operating the printer.
Width: 7.3 inches (185 mm)
Length: 12.25 inches (311 mm)
Height: 6.0 inches (152 mm)
Approximate weight: 10 pounds (4.5 kg)
Approximate shipping weight: 13 pounds (5.9 kg)
The printer will run at its best when stored and operated in an environment that
meets the following temperature and humidity conditions:
Operating temperature: 0° to 50°C (32° to 122°F)
Storage temperature: -10° to +60°C (-14° to +140°F)
Operating relative humidity: 10% to 90% (noncondensing)
Storage relative humidity: 5% to 90%
Make sure the printer is in a location where it will receive plenty of airflow.
Do not block any passages or place anything on top of the printer.
Setting Up the Printer
23