Monitoring Operation Status; Status Monitor Mode - Toshiba TOSVERT VF-P7 Instruction Manual

8. Monitoring operation status

8. 1 Status monitor mode

Status of the inverter can be monitored.
To monitor the inverter when it is normally running,
Press the
Setup procedure to monitor the inverter status. (EX. Operation at 60 Hz)
Com.No. Details of indication Key operated LED display
Standard monitor
―
＊1
mode
Parameter setup
FE01
mode
Status monitor
FE01 mode (rotating
direction)
Frequency
―
＊2
command
Load indication
―
＊3
DC voltage
＊4 ―
＊5
Output voltage
―
Input terminal
information #1
FE06
FE50 Input terminal
FE51 information #2
Input terminal
information #3
Output terminal
information #1
FE07 Output terminal
FE52 information #2
FE53
Output terminal
information #3
Sink/source
FE48
switching status
Type of connected
FE47
option
FE54  last set data
FE55  last set data
FE08 CPU version
Flush memory
FE43
version
Control EEPROM
FE09
version
Drive EEPROM
FE44
version
(Continued on the following page)
key twice and the current status is indicated on the LED display.
MON
MON
MON
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
Running frequency indication (in operation)
(In the case monitor display mode setting

 is set at [running frequency])
Indication of "Automatic acceleration
/deceleration()" that is the first basic

parameter
Indication of rotating direction

(: forward, : reverse)
Indication of frequency command value.

(In case of =)
Indication of inverter output current (load

current)(In case of =)
Indication of inverter DC voltage (Default

setting unit: [%]) (In case of =)
Indication of inverter output voltage (Default

setting unit: [%]) (In case of =)
Indication of ON/OFF status of control input
terminals (F, R, RES, ST, S1, S2, S3, S4) in
       
bits
Indication of ON/OFF status of optional control
   
input terminals (B8,B9,B10,B11) in bits
Indication of ON/OFF status of optional control
   
input terminals (B11,B12,B13,B14) in bits
Indication of ON/OFF status of control output
  
terminals (OUT1,OUT2,FL) in bits
Indication of ON/OFF status of optional control
   
output terminals (R1,R2,OUT3,OUT4) in bits
Indication of ON/OFF status of optional control
output terminals (ALM0,ALM1,ALM2,ALM3) in
   
bits
Indication of sink or source status

(: source, : sink)
 Indication of connected options
 Indication of  value set last
 Indication of  value set last
 Indication of version of the CPU
 Indication of version of the flush memory
 Indication of version of the control EEPROM
 Indication of version of the drive EEPROM
H-1
Description