3) Automatic switching by means of switching frequencies (=)
Command selected with
Command selected with
A: If the frequency set with is higher than that set with
B: If the frequency set with is equal to or lower than that set with
Frequency reference
Priority is given to
the command set
with .
4) Automatic switching by means of switching frequencies(=).
A: If the frequency set with is higher than that set with
B: If the frequency set with is equal to or lower than that set with
Frequency reference
Priority is given to
the command set
with .
A
・・・Priority is given to the command set with .
・・・Priority is given to the command set with .
Priority is given to
the command set
with .
・・・Priority is given to the reference set with .
・・・Priority is given to the reference set with .
Priority is given to
the command set
with .
F-12
Frequency reference
B