Lanner NCA-5540 User Manual page 84

NCA-5540 User Manual
Feature
SATA Configuration
SATA Mode Selection
SATA Port 0/2/3/4/5
Hot Plug 0/2/3/4/5
Spin Up Device
SATA Device Type
Option
Disabled
Enables or disables SATA Controller
Enabled
AHCI
This will configure SATA as RAID or AHCI.
RAID
Disabled
Enable or Disable SATA Port
Enabled
Disabled
Designates this port as Hot Pluggable.
Enabled
If enabled for any of ports Staggered Spin Up will be
Disabled performed and only the drives which have this option
Enabled enabled will spin up at boot. Otherwise all drives spin up at
boot.
Hard Disk
Drive Identify the SATA port is connected to Solid State Drive or
Solid State Hard Disk Drive
Drive
84
Description