Lanner NCA-5540 User Manual page 26

NCA-5540 User Manual
When handling heatsink, always grip
it along the axis of the fins of the
Heatsink
heatsink to avoid fin damage. Fins or
soldering of fins might be damaged
(1U)
by handling heatsink holding along
the long side of the heatsink.
Processor
Carrier
Processor Tray
Processor Carrier Assembly
1. Place the processor carrier on top of the processor that is in the package tray aligning
the processor carrier to
Note: Make sure that the keying feature tabs of the processor carrier are aligned to the slots in the
processor properly. If not check that the correct processor carrier is being used.
Pin 1 of the processor.
26
Pin 1 marks on