Installing The M.2 Sata Storage (Optional) - Lanner NCA-5540 User Manual

NCA-5540 User Manual

Installing the M.2 SATA Storage (Optional)

NCA-5540 comes with an additional M.2 storage card slot. Please follow the steps for installation.
1. Power off the system and open the
chassis cover
2. Locate the M.2
motherboard.
3. Align the notch of the M.2 memory
card with the socket key in the pin
slot.
4. Insert the M.2 memory card pins at
30 degrees into the socket until it is
fully seated.
5. Push down on the module and
secure it with a screw.
slot on the
35
Notch