Table of Contents
Advertisement
NCA-5540 User Manual
6. If carrier latching features do not latch the
heatsink properly, engage each latching
features by pressing the heatsink at the
unlatched corner. You may hear a clicking
sound when latched.
System Assembly PHM to Motherboard
1. Locate the processor placement on the
motherboard. Hold finger grips on socket
cover and squeeze in on the grip tabs.
Then pull the cover up and off vertically to
remove.
2. Set each anti-tilt wire to inward or
unlocked position on the heatsink.
3. Lift up the PHM. Turn the PHM over to
locate the
PIN1
corner on processor
carrier and processor.
Tabs
29
Click
Advertisement
Table of Contents
