Lanner NCA-5540 User Manual page 47

NCA-5540 User Manual
Installing the System Using the Slide Rail Kit (with Mounting Ear Brackets)
1. Check the package contents of the
Slide Rail Kit. The kit shall include
the following items:
1x pack of M4X4L screws (for
securing the Rail Brackets on the
system)
1x pack of 7.1 Round Hole
screws (for securing the system on
the rail posts)
2x Slide Rails
A rail consists of the following parts:
2. Unpack a slide rail and slide the
Inner Rail all the way to the end.
3. Stretch the Rail Bracket to the fullest.
4. Remove the Rail Bracket from the
Inner Rail by pushing the Release
Tab on the bracket outwards while
sliding it out.
Outer Rail
Release Tab
M4X4L Screws
Slide Rails
Inner Rail
Rail Bracket
47
7.1 Round Hole Screws
Release Tab
Rail Lock
Rail Bracket