Table of Contents
Advertisement
Menu
Setting
RGB Range
Select the RGB signal range from
"Auto," "Limited," or "Full." If you set to
"Auto," this item is set to "Limited"
when inputting video signals, and
"Full" when inputting PC signals.
Color Space
Select the color gamut from "Auto,"
"BT.709," or "BT.2020."
"Auto" is available only for the 12G-SDI
input connector, 3G-SDI input
connector, and HDMI input connector.
Screen Control menu
The Screen Control menu is used to set the image
display setting for each input.
Menu
Setting
4K Scan Size
Select the scan size for the display of
the 4K equivalent signal from "Off,"
"Mode7," or "Mode8."
HD Scan Size
Select the scan size for the HD signal
display from "Off," "Mode2" to
"Mode6."
SD Scan Size
Select the scan size for the SD signal
display from "Off," or "Mode1."
4K Zoom
Select the display magnification of
video signals from "Off," "x1.2," "x1.5,"
or "x2.0."
Notes
Zoom is available only for the 4K
equivalent signal.
When displaying 2 or 3 screen
display, zoom is available only in
the main screen of PIP view.
"4K Scan Size" is not available while
displaying with 4K Zoom.
Flip Pattern
Select the pattern which flips and
displays the image from "Off" or
"Rotation."
SD Aspect
Select the aspect ratio of the SD signal
display from "4:3," or "16:9."
Image Division
Set the image division of the SDI 4K
equivalent signal.
Select "2SI" to receive images of the 2
sample Interleave system. Select
"Square" to receive images of the
Square system.
HDMI Signal Format
Select the HDMI signal format from
"Standard Format," or "Enhanced
Format."
Standard Format:
Select to use for a standard HDMI
format signal.
Enhanced Format:
Select to use for a high-resolution
HDMI format signal
compatible HDMI format signal.
Menu
The PIP / POP menu is used to set the display
mode for the 2 or 3 screens display and for each
input.
Menu
3 Screen Display
Port C Display
Port C Input
Clipping Size
1)
or HDR-
Sub Screen Position
PIP
29
Setting
1) Signals in resolutions of 3840 ×
2160 or 4096 × 2160 are listed
below:
4:4:4 RGB/YCbCr-50P/60P-8bit
signals
4:2:2 YCbCr-50P/60P-12bit
signals
4:4:4 RGB/YCbCr-25P/30P-10bit
signals
Notes
Images may not be output correctly
with "Enhanced Format." In that
case, select "Standard Format."
To display the corresponding signal
with "Enhanced Format," use a
Premium High-Speed HDMI cable
within a length of 3 meters (Sony
product recommended).
PIP / POP menu
Setting
Sets the display of the sub screen for
the third screen.
Select "On" or "Off."
Sets the input connector for the third
screen.
Select from among "12G-SDI 1," "12G-
SDI 2," "3G-SDI," "Display Port,"
"HDMI," "DVI-D."
Note
When inputting the 4K equivalent
signal to the main or sub screen, the
screen is not displayed even though
the 4K equivalent signal is input to the
third screen.
The clipping size can be set when
using 2 or 3 screen-display.
HD signal:
Select from "Normal," "4:3," "5:4,"
or "V Full."
4K equivalent signal:
Select from "Normal" or "V Full."
Note
"V Full" is applied to the main/sub
screen of POP1 for 2 screen-display
and to the main screen of POP1 for 3
screen-display.
Sets the sub screen position for the 2
or 3 screens display (PIP).
Advertisement
Table of Contents
