Download  Print this page

Screen Control Menu; 3d Setting Menu - Sony LMD-X310MT Instructions For Use Manual

Hide thumbs

Advertisement

Screen Control menu

The Screen Control menu is used to set the image display
setting for each input.
Submenu
Setting
4K Scan Size
Select the scan size for the 4K signal
display.
Select "Off" or "Mode7. "
HD Scan Size
Sets the scan size for the HD signal
display of 1920 × 1080.
Select from among "Off, " "Mode2, "
"Mode3, " "Mode4, " "Mode5, " "Mode6. "
SD Scan Size
Sets the scan size for the SD signal
display.
Select from among "Off, " "Mode1. "
Zoom
Video signals can be enlarged in the
specified ratio.
Select from among "Off, " "x1.2, " "x1.5, "
"x2.0. "
Notes
Flip Pattern
Sets the flip pattern of the display.
Select from among "Off, " "Rotation. "
Note
When images are rotated, the delay
amount will be one frame longer than
the normal time. Use the unit
considering the delay amount of the
entire system.
SD Aspect
Sets the aspect ratio of the SD signal
display.
Select from among "4:3, " "16:9. "
28
Adjustment Using the Menus
Zoom is available only when the
horizontal resolution is 1280 dots or
more.
When displaying 2 or 3 screen
display, zoom is available only in the
main screen of PIP view.
When the horizontal resolution of
3D display is less than 1920 dots and
the 3D signal format is set to "Side
by Side, " Zoom is not available.
When Zoom is reflected, "4K Scan
Size, " "HD Scan Size, " and "SD Scan
Size" are not available.
Submenu
Setting
Interface Mode
Select the interface mode.
4K Quad: Select to display the 4K
signal input to the A to D
connector of SDI 1.
4K Dual: Select to display the 4K
signal input to the A or B
connector of SDI 1.
HD Dual: Select to display the HD
signal input to the A or B
connector of SDI 1.
HD/SD Single: Select to display the
HD or SD signal input to the A
connector of SDI 1.
HD/SD Quad View: Select to display
the HD or SD signal input to the
A to D connector of SDI 1 in
images divided in four.
Note
When set to "HD/SD Quad View, " the
3G Level B-DS 3D-Dual Stream signal
is not available to the A to D connectors
of SDI 1. The input signal is displayed in
black.

3D Setting menu

Submenu
Setting
2D/3D Select
Switches between 2D and 3D displays.
2D: Select to display input signals in
2D.
3D: Select to display input signals in
3D.
3D to 2D Convert: Select to display
input signals of 3D in 2D.
Notes
For 3D signal input, set to "3D" or
"3D to 2D Convert. "
When displaying 2 or 3 screen
display, the sub screen displays in
2D.
When the interface mode for SDI 1
is set to "HD/SD Quad View, " the
screen displays in 2D.

Advertisement

Table of Contents

   Related Manuals for Sony LMD-X310MT

This manual is also suitable for:

Lmd-x550mt

Comments to this Manuals

Symbols: 0
Latest comments: