Adjusting And Changing The Settings; Color Tone Adjustment Menu; Screen Control Menu - Sony LMD-X2705MD Instructions For Use Manual

OSD Setting
Power On Setting
Power Save
Serial Remote
Remote
Ethernet Setting
Custom Button
Panel Display
I/P Mode
Monitor Information
Initial Setup (page 28)
Language
Port A Input Select
Port B Input Select
Pattern Skip
PIP / POP
Custom Button
Auto Input Select
Preset (page 29)
Load User Setting
Save User Setting
User Name
Load Default

Adjusting and changing the settings

Color Tone Adjustment menu

The Color Tone Adjustment menu is used to
adjust picture quality for each input.
You need to use the measurement instrument to
adjust the color temperature.
Recommended: Konica Minolta color analyzer
CA-310
Submenu Setting
Gamma Select the appropriate gamma mode
from among "1.8," "2.0," "2.2," "2.4,"
"2.6," "DICOM," "HLG."
"DICOM" is for reference, not
diagnostic, purposes only.
Select "HLG" when the input signal is
HDR-HLG.
Phase Adjusts color tones. The higher the
setting, the more greenish the picture.
The lower the setting, the more
purplish the picture.
Chroma Adjusts color intensity. The higher the
setting, the greater the intensity. The
lower the setting, the lower the
intensity.
Brightness Adjusts brightness.
Contrast Adjusts contrast.
Submenu
Color Temperature
Gain R Offset
Gain G Offset
Gain B Offset
Bias R Offset
Bias G Offset
Bias B Offset
Mono
Sharpness H
Sharpness V
RGB Range
Color Space

Screen Control menu

The Screen Control menu is used to set the image
display setting for each input.
Submenu
4K Scan Size
HD Scan Size
SD Scan Size
Flip Pattern
SD Aspect
24
Setting
Select the color temperature from
among "D56," "D65," "D93."
Note
If the setting is changed, Gain R/G/B
Offset and Bias R/G/B Offset are
restored to 0 respectively.
Adjust color temperature in detail, and
color balance (Gain).
Adjust color temperature in detail, and
color balance (Bias).
Sets the display to a monochrome
picture. Set to "On" for a monochrome
picture, set to "Off" for a normal
(chromatic) picture.
Adjusts the horizontal sharpness. The
higher the setting, the sharper the
picture. The lower the setting, the
softer the picture.
Adjusts the vertical sharpness. The
higher the setting, the sharper the
picture. The lower the setting, the
softer the picture.
Select the RGB signal range from
"Auto," "Limited," "Full." If you set to
"Auto," this item is set to "Limited"
when inputting video signals, and
"Full" when inputting PC signals.
Select the color gamut from "Auto,"
"BT.709," "BT.2020," "Native."
Select "Auto" only for the HDMI input
connector.
Setting
Select the scan size for the 4K signal
display from "Off," "Mode4,"
"Underscan."
Selecting "Underscan" reduces the
screen size to approximately 80%.
Select the scan size for the HD signal
display from "Off," "Mode2," "Mode3,"
"Underscan."
Selecting "Underscan" reduces the
screen size to approximately 80%.
Select the scan size for the SD signal
display from "Off," "Mode1."
Select the flip pattern of the image
display from "Off," "Rotation," "Mirror."
Select the aspect ratio of the SD signal
display from "4:3," "16:9."