Page 2
Record these numbers in the spaces provided below. terminal which brings the various parts of a Refer to these numbers whenever you call upon your system to the same potential. Sony dealer regarding this product. Safety sign Model No. Follow the warnings in the Instructions for Serial No.
Page 3
The portable and mobile RF communications equipment such as cellular phones can affect the LMD-X310S/X550S. Warning The use of accessories and cables other than those specified, with the exception of replacement parts sold by Sony Corporation, may result in increased emissions or decreased immunity of the LMD-X310S/X550S.
Page 4
X310S/X550S should assure that it is used in such as environment. Compliance level Immunity test IEC 60601 test level Electromagnetic environment-guidance LMD-X310S LMD-X550S Electrostatic ±6 kV contact ±6 kV contact ±6 kV contact Floors should be wood, concrete or discharge (ESD) ceramic tile.
Page 5
Guidance and manufacturer’s declaration - electromagnetic immunity The LMD-X310S/X550S is intended for use in the electromagnetic environment specified below. The customer or the user of the LMD- X310S/X550S should assure that it is used in such as environment. Immunity test IEC 60601 test level Compliance level Electromagnetic environment-guidance...
Page 6
For the customers in Europe This product has been manufactured by or on behalf of Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108- 0075 Japan. Inquiries related to product compliance based on European Union legislation shall be addressed to the authorized representative, Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany.
Page 7
For the customers in the U.S.A. SONY LIMITED WARRANTY - Please visit http:// For the customers in U.S.A. and Canada www.sony.com/psa/warranty for important Warning on power connection for medical use information and complete terms and conditions of Please use the following power supply cord. With Sony’s limited warranty applicable to this product.
Licensing LLC in the United States and other Error Messages ..........27 countries. Specifications ..........27 LMD-X310S ............27 LMD-X550S ............28 “Innovation by Sony & Olympus” Phrase and Dimensions ...........34 indicates the mark of advanced medical imaging LMD-X310S ............34 solution from Sony and Olympus. Table of Contents...
Some people may experience discomfort (such as eye One Unit strain, fatigue, or nausea) while watching video images. Sony recommends that all viewers take regular As problems can occasionally occur for the monitor, breaks while watching video images. The length and...
Masked images with aspect ratios other than 17:9 for over a long period of use, because of the physical the LMD-X310S and 16:9 for the LMD-X550S characteristics of the liquid crystal display, such Color bars or images that remain static for a long time ...
By utilizing the A.I.M.E. function, users can expect the unit. following effects on displayed images. If you have any questions about this unit, contact your authorized Sony dealer. Color Enhancement Function This function clarifies color tone differences between objects.
Page 12
Users can select the degree of the structure enhancement from levels S1 (minimum) to S4 (maximum) for this purpose according to their preference. A.I.M.E. is a registered trademark of Sony Corporation. A.I.M.E. is an optional function for enhancing the color or structure of the displayed image.
Location and Function of Parts and Controls Front Panel Power indicator A.I.M.E. button When the power is turned on, the power indicator lights Sets the A.I.M.E. function to Off and On. When the in green. A.I.M.E. function is set to On, A.I.M.E. Structure and When the protection function is activated and the A.I.M.E.
Press the side to turn the monitor on. Press the side to switch the unit to the standby state, and the indicator light turns off. Input Signals and Adjustable/Setting Items Input signal Item DVI-D HDMI SDI 1 SDI 2 Video Video ...
HDMI input connector Input connector for HDMI signals. Use HighSpeed HDMI Cable with Cable Type Logo. (Recommend Sony Cable.) 3G/HD/SD-SDI input/output connector (BNC type) SDI 1 (4K/HD) connector (input) Input connector for serial digital component signals ...
Page 16
(equipotential) terminal 100BASE-TX. Connects the equipotential plug. (AC input) connector (LMD-X550S only) Connects the supplied AC power cord. Do not come into contact with the terminals of the rear panel connectors and patients at the same time.
AC power cord from the AC power plug holder by holding the fixing levers of the holder from both sides to release the lock. Then, remove the DC connector from the unit. LMD-X550S Make sure that the switch is set to (in a standby state).
Removing the Connector Cover To use the connector, remove the connector cover as follows. Before removing the connector cover, disconnect the power cord. Loosen the two screws. Slide the connector cover in the direction of the arrow and remove it. Connect the plug of the AC power cord to an AC outlet.
4K Monitor (Sub) This unit with the connector cover attached conforms to the waterproofed standard. (LMD-X310S: See page 28, LMD-X550S: See page 29) Note that if the unit is used with the connector cover removed, its waterproof performance is not guaranteed.
The selected item is displayed in blue. Setting the menu Press the / button to select a language. language The menu changes to the selected language. To clear the menu You can select one of seven languages (English, Chinese, Japanese, Italian, Spanish, German, French) for display Press the MENU button.
The selected tab is shown in blue, and setting items Using the Menu of the selected tab appear. Select an item. The unit is equipped with an on-screen menu for Press the / button to select the item. making various adjustments and settings such as picture The item to be changed is displayed in blue.
System Configuration Adjustment Using the Control Lock OSD Setting Menus Power On Setting Power Save Serial Remote Ethernet Setting Items Custom Button Panel Display The screen menu of this monitor consists of the following items. Initial Setup Color Tone Adjustment Default Preset Language Color Mode...
Submenu Setting Submenu Setting A.I.M.E. Sets the A.I.M.E. function to “Off” 4K Scan Size Select the scan size for the 4K signal and “On. ” display. 1) A.I.M.E.: Enables better image Select “Off” or “Mode7. ” reproduction and display. HD Scan Size Sets the scan size for the HD signal display of 1920 ×...
Submenu Setting Submenu Setting Port C Input Sets the input connector for the third HDCP Setting Sets the HDCP setting for signals input screen. in the DVI-D connector. Select from among “SDI 1, ” “SDI 2, ” Enable: Sets to use the signals ...
Submenu Setting Submenu Setting Auto: The format and scan mode are Sleep Mode Sets the sleep mode to on or off. When displayed for about 3 seconds you set to “On, ” the monitor enters into when the content of Status power saving mode by turning off the Display is changed.
Submenu Setting Troubleshooting Pattern Skip Sets the pattern that is skipped when changing the displaying pattern by pressing the PIP/POP button on the front panel while using 2 or 3 screens This section may help you isolate the cause of a problem display.
Error Messages Specifications When the following messages appear on the screen, turn LMD-X310S off the power and contact an authorized Sony dealer. Messages Description Picture performance Fan Error A malfunction occurs in the fan. LCD panel a-Si TFT Active Matrix...
20 °C to 30 °C (68 °F to 86 °F) Continuous Humidity 30% to 85% (no condensation) Pressure 700 hPa to 1060 hPa Storage and transport conditions LMD-X550S Temperature –20 °C to +60 °C (–4 °F to +140 °F) Picture performance Humidity 0% to 90% Pressure...
Page 29
Notes Always verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS...
Page 30
Available signal formats The unit is compatible with the signal systems shown below: Signal format SDI 1 SDI 2 SD-SDI 1) 7) 720 × 487/60I 4 : 2 : 2 YCbCr 10bit 720 × 576/50I 4 : 2 : 2 YCbCr 10bit HD-SDI ...
Page 33
Dot clock: 25.175 MHz to 148.5 MHz Picture size, phase: automatic discrimination by the DE (Data Enable) signal Displays normally up to the maximum horizontal resolution, 2048 dots (LMD-X310S) or 1920 dots (LMD-X550S). 1) Also compatible with the frame rate 1/1.001.
LMD-X550S Dimensions Front LMD-X310S Front Rear Rear Side Side Unit: mm (inches) Mass: Approx. 35.2 kg (77 lb 9.6 oz) Unit: mm (inches) Mass: Approx. 11.8 kg (26 lb 0.23 oz) Dimensions...
LMD-X310S/X550S * Length of M4/M6 screws Attached object Monitor cabinet Screw ) to 9 ( * The specification of the screw is for the VESA mount. Unit: mm (inches) Dimensions...