Table of Contents
Advertisement
Menu
Setting
Gamma
Select the appropriate gamma mode
from "1.8," "2.0," "2.2," "2.4," "2.6,"
"DICOM," "Highlight," "HLG," or "Auto."
"DICOM" is for reference, not for
diagnostic purposes.
Select "HLG" when the input signal is
HDR-HLG.
Phase
Adjusts color tones. The higher the
setting, the more greenish the picture.
The lower the setting, the more
purplish the picture.
Chroma
Adjusts color intensity. The higher the
setting, the greater the intensity. The
lower the setting, the lower the
intensity.
Brightness
Adjusts brightness.
Contrast
Adjusts contrast.
A.I.M.E.
Select the A.I.M.E.
"Off," "On," or "Check Mode."
When you select "Check Mode," both
images of A.I.M.E. "Off" / "On" are
displayed.
Identical images are displayed side by
side in 2D, and the A.I.M.E. function is
applied to the image on the right. A
single image is divided and displayed
side by side in 3D, and the A.I.M.E.
function is applied to the image on the
right.
1) A.I.M.E.: Enables better image
reproduction and display.
The A.I.M.E. Logo is displayed on
the Status Display when the A.I.M.E.
function is activated.
The NR setting is applied when the
A.I.M.E. function is activated.
(page 34)
When the PIP/POP view is set, the
A.I.M.E. setting is applied only to
the input connector selected on the
main display.
A.I.M.E. Structure
Adjusts contrast enhancement.
A.I.M.E. Color
Adjusts color enhancement.
A.I.M.E. Shadow
Adjusts visibility of the dark area.
Color Temperature
Select the color temperature from
"D93," or "D65."
Note
If the setting is changed, Gain R/G/B
Offset and Bias R/G/B Offset are
restored to 0 respectively.
Gain R Offset
Adjust color temperature in detail, and
Gain G Offset
color balance (Gain).
Gain B Offset
Bias R Offset
Adjust color temperature in detail, and
Bias G Offset
color balance (Bias).
Bias B Offset
1)
function from
29
Menu
Setting
Mono
Sets the display to a monochrome
picture. Set to "On" for a monochrome
picture, set to "Off" for a normal
(chromatic) picture.
Sharpness H
Adjusts the horizontal sharpness. The
higher the setting, the sharper the
picture. The lower the setting, the
softer the picture.
Sharpness V
Adjusts the vertical sharpness. The
higher the setting, the sharper the
picture. The lower the setting, the
softer the picture.
RGB Range
Select the RGB signal range from
"Auto," "Limited," or "Full." If you set to
"Auto," this item is set to "Limited"
when inputting video signals, and
"Full" when inputting PC signals.
Color Space
Select the color gamut from "Auto,"
"BT.709," or "BT.2020."
"Auto" is available only for the 12G-SDI
input connector, 3G-SDI input
connector, and HDMI input connector.
Screen Control menu
The Screen Control menu is used to set the image
display setting for each input.
Menu
Setting
4K Scan Size
Select the scan size for the display of
the 4K equivalent signal from "Off,"
"Mode7," or "Mode8."
HD Scan Size
Select the scan size for the HD signal
display from "Off," "Mode2" to
"Mode6."
SD Scan Size
Select the scan size for the SD signal
display from "Off," or "Mode1."
4K Zoom
Select the display magnification of
video signals from "Off," "x1.2," "x1.5,"
or "x2.0."
Notes
Zoom is available only for the 4K
equivalent signal.
When displaying 2 or 3 screen
display, zoom is available only in
the main screen of PIP view.
"4K Scan Size" is not available while
displaying with 4K Zoom.
Flip Pattern
Select the pattern which flips and
displays the image from "Off" or
"Rotation."
SD Aspect
Select the aspect ratio of the SD signal
display from "4:3," or "16:9."
Image Division
Set the image division of the SDI 4K
equivalent signal.
Select "2SI" to receive images of the 2
sample Interleave system. Select
"Square" to receive images of the
Square system.
Advertisement
Table of Contents
