Table of Contents
Advertisement
Submenu
Setting
A.I.M.E.
Sets the A.I.M.E.
and "On. "
1) A.I.M.E.: Enables better image
reproduction and display.
Notes
A.I.M.E. Logo is displayed on the
display area where the A.I.M.E.
function is activated.
When the HD/SD quad view is set,
A.I.M.E. functions for only the SDI
1-A input.
When the PIP/POP view is set,
A.I.M.E. functions for only the main
display.
A.I.M.E. Structure
Adjusts the contrast enhancement.
A.I.M.E. Color
Adjusts the color enhancement.
Color Temperature
Select the color temperature from
among "D65, " "D93. "
Note
If the setting is changed, Gain R/G/B
Offset and Bias R/G/B Offset are
restored to 0 respectively.
Gain R Offset
Adjust color temperature in detail, and
Gain G Offset
color balance (Gain).
Gain B Offset
Bias R Offset
Adjust color temperature in detail, and
Bias G Offset
color balance (Bias).
Bias B Offset
Mono
Sets the display to a monochrome
picture. Set to "On" for a monochrome
picture, set to "Off" for a normal
(chromatic) picture.
Sharpness H
Adjusts the horizontal sharpness. The
higher the setting, the sharper the
picture. The lower the setting, the softer
the picture.
Sharpness V
Adjusts the vertical sharpness. The
higher the setting, the sharper the
picture. The lower the setting, the softer
the picture.
RGB Range
Sets the RGB signal range. Select from
among "Auto, " "Limited, " "Full. " If you
set to "Auto, " this item is set to
"Limited" when inputting video signal,
and "Full" when inputting PC signals.
Color Space
Select the color gamut from among
"BT.709, " "Native, " "BT.2020, " "Auto. "
Screen Control menu
The Screen Control menu is used to set the image display
setting for each input.
1)
function to "Off"
The PIP / POP menu is used to set the display mode for
the 2 or 3 screens display and for each input.
Submenu
Setting
4K Scan Size
Select the scan size for the 4K signal
display.
Select "Off" or "Mode7. "
HD Scan Size
Sets the scan size for the HD signal
display of 1920 × 1080.
Select from among "Off, " "Mode2, "
"Mode3, " "Mode4, " "Mode5, " "Mode6. "
SD Scan Size
Sets the scan size for the SD signal
display.
Select from among "Off, " "Mode1. "
Zoom
Video signals can be enlarged in the
specified ratio.
Select from among "Off, " "x1.2, " "x1.5, "
"x2.0. "
Note
Zoom is available only when the
horizontal resolution is 1280 dots or
more.
Flip Pattern
Sets the flip pattern of the display.
Select from among "Off, " "Rotation. "
Note
When images are rotated, the delay
amount will be one frame longer than
the normal time. Use the unit
considering the delay amount of the
entire system.
SD Aspect
Sets the aspect ratio of the SD signal
display.
Select from among "4:3, " "16:9. "
Interface Mode
Select the interface mode.
4K Quad: Select to display the 4K
signal input to the A to D
connector of SDI 1.
4K Dual: Select to display the 4K
signal input to the A or B
connector of SDI 1.
HD Dual: Select to display the HD
signal input to the A or B
connector of SDI 1.
HD/SD Single: Select to display the
HD or SD signal input to the A
connector of SDI 1.
HD/SD Quad View: Select to display
the HD or SD signal input to the
A to D connector of SDI 1 in
images divided in four.
PIP / POP menu
Submenu
Setting
3 Screen Display
Port C Display
Sets the display of the sub screen for the
third screen.
Select "On" or "Off. "
23
Adjustment Using the Menus
Advertisement
Table of Contents
