Table of Contents
Advertisement
update of equipment connected to the IT-
NETWORK; and
upgrade of equipment connected to the IT-
NETWORK.
Use with electrosurgical knives and
similar devices
If this unit is used together with an
electrosurgical knife, etc., the picture may be
disturbed, warped or otherwise abnormal as a
result of strong radio waves or voltages from the
device. This is not a malfunction.
When you use this unit simultaneously with a
device from which strong radio waves or
voltages are emitted, confirm the effect of this
before using such devices, and install this unit in
a way that minimizes the effect of radio wave
interference.
Recommendation to Use more than One
Unit
As problems can occasionally occur for the
monitor, when the monitor is used for safety
control of personnel, assets or stable picture, or
for emergencies, we strongly recommend you
use more than one unit or prepare a spare unit.
About the Power Connection
Use with the supplied AC power cord.
LCD image display
Due the physical characteristics of LCD panels,
there may be a decrease in brightness or change
in color temperature over a long period of use.
These problems are not a malfunction.
In addition, these occurrences will not affect
recorded data.
About the LCD Display Panel
The LCD panel fitted to this unit is
manufactured with high precision technology,
giving a functioning pixel ratio of at least
99.99%. Thus a very small proportion of pixels
may be "stuck", either always off (black),
always on (red, green, or blue), or flashing. In
addition, over a long period of use, because of
the physical characteristics of the liquid crystal
display, such "stuck" pixels may appear
spontaneously. These problems are not a
malfunction.
Do not leave the LCD screen facing the sun as it
can damage the LCD screen. Take care when
you place the unit by a window.
Do not push or scratch the LCD screen. Do not
place a heavy object on the LCD screen. This
may cause the screen to lose uniformity.
If the unit is used in a cold place, a residual
image may appear on the screen. This is not a
malfunction. When the monitor becomes
warm, the screen returns to normal.
The screen and the cabinet become warm
during operation. This is not a malfunction.
About the Screen Protect Panel
The screen protect panel is made of toughened
glass, but there is a possibility that it may crack.
Handle with care.
Avoid strong impact, such as dropping from a
high place.
Do not damage the panel with a sharp object.
The glass may crack due to the damage.
On a Long Period of Use
Due to the characteristics of LCD panel,
displaying static images for extended periods, or
using the unit repeatedly in a high temperature/
high humidity environments may cause image
smearing, burn-in, areas of which brightness is
permanently changed, lines, or a decrease in
overall brightness.
In particular, continued display of an image
smaller than the monitor screen, such as in a
different aspect ratio, may shorten the life of the
unit.
Avoid displaying a still image for an extended
period, or using the unit repeatedly in a high
temperature/high humidity environment such
an airtight room, or around the outlet of an air
conditioner.
To prevent any of the above issues, we
recommend reducing brightness slightly, and to
turn off the power whenever the unit is not in
use.
13
Advertisement
Table of Contents
