Table of Contents
Advertisement
Auto Configuration
Auto Configuration selects predetermined optimal values of chipset
parameters.
When Disabled, chipset parameters revert to setup information stored
in CMOS.
Many fields in this screen are not available when Auto Configuration is
Enabled.
The Choice: Enabled, Disabled.
EDO DRAM Speed Selection
Item
50ns
60ns
EDO CASx# MA Wait State
You could select the wait state timing control type of EDO DRAM CAS
MA (memory address bus).
The choice: 1, 2.
EDO RASx# Wait State
You could select the wait state timing control type of EDO DRAM CAS MA
(memory address bus).
The choice: 1, 2.
SDRAM RAS-to-CAS Delay
You can select RAS to CAS Delay time in HCLKs of 2/2 or 3/3. The
system board designer should set the values in this field, depending
on the SDRAM installed. Do not change the values in this field
unless you change specifications of the installed SDRAM or the
installed CPU.
The Choice: 2, 3.
Description
DRAM Timing Type.
DRAM Timing Type.
4-50
Advertisement
Table of Contents
