FlyTech 3000 Series User Manual page 70

Video Off Method
This determines the manner in which the monitor is blanked.
Item
V/H
SYNC+Blank
Blank Screen
DPMS
Video Off After
When enabled, this feature allows the VGA adapter to operate in a power
saving mode.
Item Description
N/A Monitor will remain on during power saving modes.
Suspend Monitor blanked when the system enters the Suspend mode.
Standby Monitor blanked when the system enters Standby mode.
Doze Monitor blanked when the system enters any power saving
mode.
MODEM Use IRQ
Name the interrupt request (IRQ) line assigned to the modem (if any) on
your system. Activity of the selected IRQ always awakens the system.
The choices: NA, 3, 4, 5, 7, 9, 10, 11
Doze Mode
When enabled and after the set time of system inactivity, the CPU clock
will run at slower speed while all other devices still operate at full speed.
Standby Mode
When enabled and after the set time of system inactivity, the CP U clock
will run at lower speed and the video would be shut off while all other
devices still operate at full speed.
Suspend Mode
When enabled and after the set time of system inactivity, all devices
except the CPU will be shut off.
Description
This selection will cause the system to turn off the
vertical and horizontal synchronization ports and write
blanks to the video buffer.
This option only writes blanks to the video buffer.
Initial display power management signaling.
4-24