Table of Contents
Advertisement
Soft-Off by PWR-BTTN
When Enabled, turning the system off with the on/off button places the
system in a very low-power-usage state, with only enough circuitry
receiving power to detect power button activity or Resume by Ring
activity.
The Choice: Instant-Off, Delay 4 Sec.
PowerOn by Ring
An input signal on the serial Ring Indicator (RI) line (in other words, an
incoming call on the modem) awakens the system from power off state.
The Choice: Enabled, Disabled.
Resume by Alarm
To set Date and Time to resume the system.
Wake Up On LAN
An input signal on the mainboard control by LAN chip awakens the
system from power off state. The W-O-L will function when this system
connected to ATX power supply.
The Choice: Enabled, Disabled.
IRQ 8 Break Suspend
You can Enable or Disable monitoring of IRQ8 so it does not awaken the
system from Suspend mode.
The Choice: Enabled, Disabled.
Reload Global Timer Events
When Enabled, an event occurring on each device listed below restarts
the
global time for Standby mode.
IRQ[3 -7, 9-15], NMI
Primary IDE 0
4-57
Advertisement
Table of Contents
