Table of Contents
Advertisement
ê Caution
Before installation, please note the maximum dimension of the interface
card to be fixed in the system housing is that : upper ISA –
120x185mm,
lower ISA – 120 x 155mm, upper PCI – 75 x 155mm, lower
PCI-75x155mm.
hFollow the steps on how to install an ISA/PCI board.
1. Please remove screws which fixed the expansion slot card on the
chassis and lift up the expansion slot card.
2. Lift up the expansion bracket next to the rear panel and take the metal
strips off by unfastening the screws.
2-20
Advertisement
Table of Contents
