Installing A Cpu - FlyTech 3000 Series User Manual

2.4.3 Installing a CPU

The Book PC 3000 Series (B64) contains a Socket 370, which can
accept the following CPU types.
®
l Intel
PPGA / FC-PGA processor.
Be sure to attach a CPU cooling fan to the CPU included in the package
after you install the CPU. It prevents the CPU from overheating.
ê Caution
To avoid generating static electricity and damaging the CPU, ground
yourself by touching a grounded metal surface before you touch the
CPU.
Do not remove the heat dissipation under the CPU cooling fan.
Do not touch the pins of the CPU. Dirt may cause a malfunction.
Follow these steps to install the CPU:
1.Check and confirm that the jumpers are correctly set for the CPU you
are going to install.
2.Lift the release lever of the Socket 370.
3.Align the pins of the CPU to the pin holes of the Socket 370. Be sure
to pay attention to the orientation of the CPU.
Lever
Notch
4.Push down the CPU into the Socket 370.
5.Push down the release lever and lock it.
6.Hook the hole in EIF clip for the CPU cooling fan onto the notch on the
socket 370.
7. Place the CPU cooling fan atop the CPU surface.
8.Push down the opposite side of the ZIF clip and hook it.
2-14