Starting The Bios Setup - FlyTech 3000 Series User Manual

4.2.BIOS Setup– Intel 815EB Chipset
Remark: We select the following model as sample to analysis how to
setup System BIOS. For other model or updated BIOS information,
please check with your supplier.
MODEL
CPU
M / B
BIOS
For above models of the NET PC NC1 computer's BIOS is supplied by
AWARD SOFTWARE, INC. AWARD'S BIOS Flash ROM has a built-in
Setup program that allows users to modify the basic system configuration.
This type of information is stored in battery-backed RAM of CMOS
chipset so that it retains the Setup information when the power is turned
off.

4.2.1 Starting the BIOS Setup

Power on the computer and press <Del> immediately will allow you to
enter Setup. The other way to enter Setup is to power on the computer,
when the below message appears briefly at the bottom of the screen
during the POST (Power On Self Test), press <Del> key or
simultaneously press <Ctrl>, <Alt>, and <Esc> keys.
TO ENTER SETUP BEFORE BOOT PRESS <CTRL-ALT-ESC> OR
<DEL> KEY
If the message disappears before you respond and you still wish to enter
Setup, restart the system to try again by turning it OFF then ON
pressing the "RESET" button on the system case. You may also restart
by simultaneously pressing <Ctrl>, <Alt>, and <Delete> keys. If you do
not press the keys at the correct time and the system does not boot, an
error message will be displayed and you will again be asked to,
PRESS <F1> TO CONTINUE, <CTRL-ALT-ESC> OR <DEL> TO ENTER
SETUP
NET PC NC1 Series
Intel Pentium II /III / SOCKET 370
B61 supports Intel 815EB
AWARD
4-2