Table of Contents
Advertisement
Boot Sequence
This category determines which drive computer searches first for the disk
operating system (i.e., DOS). Default value is A, C.
Item
A, C, SCSI
C, A, SCSI
C, CDROM, A
CDROM, C, A
D, A, SCSI
E, A, SCSI
F, A, SCSI
SCSI, A, C
SCSI, C, A
C only
LS/ZIP, C
Swap Floppy Drive
Item
Enabled
Disabled
Boot Up Floppy Seek
During POST, BIOS will determine if the floppy disk drive installed is 40 or
80 tracks. 360K type is 40 tracks while 720K, 1.2M and 1.44M are all 80
tracks.
Description
System will first search the floppy disk drive then hard
disk drive for booting purpose
System will first search the hard disk drive then floppy
disk drive for booting purpose
System will first search the harddisk drive then CDROM
drive and the next is floppy disk drive for booting
purpose
System will first search the CDROM drive then harddisk
drive and the next is floppy disk drive for booting
purpose
System will first search the hard disk D drive then
floppy disk drive for booting purpose
System will first search the hard disk E drive then floppy
disk drive for booting purpose
System will first search the hard disk F drive then floppy
disk drive for booting purpose
System will first search the SCSI hard disk drive then
floppy disk drive for booting purpose
System will first search the SCSI hard disk drive then
hard disk drive for booting purpose
System only search the hard disk drive for booting
purpose
System will first search the LS120 drive then hard disk
drive for booting purpose
Description
Enable Floppy Drives A and B Swap function
Disable Floppy Drives A and B Swap function
4-12
Advertisement
Table of Contents
